close mobile menuClose Menu
closeClose

SCHEDULE SERVICE

  • LOCATIONS


    24/7 ELECTRIC MAIN OFFICE

    Suite 1A 5905 11th Street

    SE Calgary, AB T2H 2A6

    Select a Province

    Select a City

    Why are my Lights Buzzing?

    Why are my Lights Buzzing?

    August 21, 2018

    Why are my Lights Buzzing?

    When you’re tried, stressed, or just greeted by it first thing in the morning, the that constant droning
    buzz from your lights isn’t a welcome sound. But why is it there? What’s causing that incessant noise
    and how can you put a stop to it? Lighting systems, if you zoom out enough, are pretty simple. You
    have the wires, power source (in the case of your home that would be your circuit breaker or a ballast),
    controls (light switches and dimmers), and the light bulbs and fixtures themselves. The trouble with
    noise issues in your electrical system is that any of these points could be the culprit. Different problems
    cause similar noises, though their location changes depending on what the issue is. Let’s break things
    down and walk you through how to identify the problem so you know if it’s time to call for a repair or
    simply change out a light bulb.

    Buzzing Electrical Wires

    While it can be difficult to detect exactly where the buzz is coming from, if you hear a hum inside the
    walls whenever your lights are on, then it’s the wires themselves that are humming with electricity. This
    is most often the case with incandescent lights and is typically due to overloading your lines with high-
    wattage lamps. If you’ve recently updated with brighter incandescent bulbs, then remove one or two
    bulbs and see if that helps with the noise. If it does, then switch out your lights for lower wattage bulbs
    or switch to CFL or LED bulbs to keep the same brightness but decrease the load you’re placing on your
    home’s wiring.

    Humming Dimmers and Switches

    Similar to electrical wires, if you hear buzzing coming from a wall switch or dimmer (especially when the
    dimmer is turned down), you may be overloading the switch. If the switch or faceplate feels hot to the
    touch as well, you’ve definitely exceeded its maximum rating and should call an electrician to have the
    switch upgraded or you should purchase lights with a lower wattage. Most wall switches support a
    maximum wattage of 600 watts (so yes, 6 100-watt incandescent bulbs is too much for a single switch).

    Another issue arises when you’re using dimmer switches for your lights. These switches are fantastic
    when it comes to conserving energy and adding custom light levels to any room but they run into issues
    with energy-efficient LED and CFL lights. This is because older dimmer switches are TRIAC dimmers that
    cause a current pulse, providing less power for an incandescent but causing LEDs to switch on and off
    rapidly. That rapid switching causes both an electric hum and rapid flickering of LEDs and some
    fluorescent lights.

    You should always make sure that any dimmers you own are compatible with the LEDs you’re using. It’s
    important to purchase a test bulb first when upgrading or to have a trained technician install dimmer
    switches that work with your LED lights. If you’re concerned that the dimmer in your home is causing
    the buzzing noise, take the offending lights and plug them into a separate wall switch with no other
    lights on that circuit. Does the light still buzz and hum? If yes, then it’s likely the dimmer that’s to
    blame.

    Ballasts and Drivers

    While incandescent bulbs can operate on AC electricity, LEDs and fluorescents need to have the power
    regulated more closely. LEDs are typically DC-only devices and fluorescent lights require very carefully
    controlled power and current levels to maintain their internal electrical arcs. To do this, they both use
    specific power-regulating devices known as ballasts and drivers (for fluorescent lamps and led lamps
    respectively).

    In many cases, when a tube fluorescent is flickering, buzzing, or humming, it’s due to a power imbalance
    or an ageing ballast. In most cases, that means the ballast needs to be replaced so you’ll need to call an
    electrician to have the ballast changed out. Making sure you have a working, quality ballast installed
    (they have to be paired to the right type of fluorescent tube) is important for both your monthly energy
    bill and for the longevity of the light bulb itself.

    LED drivers are similar in a way. They reduce standard home electrical current into a DC current that is
    usable by the bulb. They also regulate the maximum and minimum amount of power (or current
    depending on what kind of driver is being used) to maintain a constant supply to the LED bulb. When
    the driver is damaged, installed improperly, or simply too old to function properly anymore (drivers
    typically wear out before the LED bulb does), then the light may begin to flicker or buzz during
    operation.

    Of course, LED bulbs and CFLs still include both ballasts and drivers. They simply include them in the
    light’s envelope (typically in the base of the bulb). This is why it’s important to buy a test bulb first
    before you purchase enough to replace the lights in your home. Since those drivers cannot be replaced
    without replacing the entire light bulb. Buy a test bulb, see if it works in your home, and then replace
    the remaining lights.

    Light Bulb Differences

    One final note about noisy lights: Never mix and match light bulbs. Yes, they can be used together but
    they’re more likely to interfere with each other if you’ve mixed lights, especially if those lights are on a
    dimmer. Make sure that each circuit consists solely of LED, fluorescent, or incandescent bulbs. If you
    hear buzzing coming from your lights and notice that you have more than one type of bulb installed, try
    removing the odd bulb and see if the sound persists. If it doesn’t, replace the bulb with more of the
    type that are already installed on that circuit.